Zirconium carbide
Zirconium carbide in the unit cell | |
Powder of zirconium carbide | |
Names | |
---|---|
Other names
Zirconium(I) carbide
|
|
Identifiers | |
12070-14-3 ![]() |
|
UN number | 3178 |
Properties | |
CZr | |
Molar mass | 103.24 g·mol−1 |
Appearance | Gray refractory solid |
Odor | Odorless |
Density | 6.73 g/cm3 (24 °C)[1] |
Melting point | 3,532–3,540 °C (6,390–6,404 °F; 3,805–3,813 K)[1][2] |
Boiling point | 5,100 °C (9,210 °F; 5,370 K)[2] |
Insoluble | |
Solubility | Soluble in concentrated H2SO4, HF,[1] HNO3 |
Structure | |
Cubic, cF8[3] | |
Fm3m, No. 225[3] | |
a = 4.6976(4) Å[3]
α = 90°, β = 90°, γ = 90°
|
|
Octahedral[3] | |
Thermochemistry | |
37.442 J/mol·K[4] | |
Std molar
entropy (S |
33.14 J/mol·K[4] |
Std enthalpy of
formation (ΔfH |
−207 kJ/mol (extrapolated to stoichiometric composition)[5] −196.65 kJ/mol[4] |
Vapor pressure | {{{value}}} |
Related compounds | |
Other anions
|
Zirconium nitride Zirconium oxide |
Other cations
|
Titanium carbide Hafnium carbide Vanadium carbide Niobium carbide Tantalum carbide Chromium carbide Molybdenum carbide Tungsten carbide |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
|
![]() ![]() ![]() |
|
Infobox references | |
Zirconium carbide (ZrC) is an extremely hard refractory ceramic material,[6] commercially used in tool bits for cutting tools. It is usually processed by sintering.
Contents
Properties
Thermal expansion coefficients of ZrC[2] |
|
---|---|
T | αV |
100 °C | 0.141 |
200 °C | 0.326 |
400 °C | 0.711 |
800 °C | 1.509 |
1200 °C | 2.344 |
It has the appearance of a gray metallic powder with cubic crystal structure. It is highly corrosion resistant. This Group IV interstitial transition-metal carbide is also a member of ultra high temperature ceramics or (UHTC). Due to the presence of metallic bonding, ZrC has a thermal conductivity of 20.5 W/m·K and an electrical conductivity (resistivity ~43 μΩ·cm), both of which are similar to that for zirconium metal. The strong covalent Zr-C bond gives this material a very high melting point (~3530 °C), high modulus (~440 GPa) and hardness (25 GPa). ZrC has a lower density (6.73 g/cm3) compared to other carbides like WC (15.8 g/cm3), TaC (14.5 g/cm3) or HfC (12.67 g/cm3). ZrC seems suitable for use in re-entry vehicles, rocket/SCRAM jet engines or supersonic vehicles in which low densities and high temperatures load-bearing capabilities are crucial requirements.[citation needed]
Like most carbides of refractory metals, zirconium carbide is sub-stoichiometric, i.e., it contains carbon vacancies. At carbon contents higher than approximately ZrC0.98 the material contains free carbon.[5] ZrC is stable for a carbon-to-metal ratio ranging from 0.65 to 0.98.
ZrC reacts with water and acids and is pyrophoric.[citation needed]
The mixture of zirconium carbide and tantalum carbide is an important cermet material.[citation needed]
Uses
Hafnium-free zirconium carbide and niobium carbide can be used as refractory coatings in nuclear reactors. Because of a low neutron absorption cross-section and weak damage sensitivity under irradiation, it finds use as the coating of uranium dioxide and thorium dioxide particles of nuclear fuel. The coating is usually deposited by thermal chemical vapor deposition in a fluidized bed reactor. It also has high emissivity and high current capacity at elevated temperatures rendering it as a promising material for use in thermo-photovoltaic radiators and field emitter tips and arrays.[citation needed]
It is also used as an abrasive, in cladding, in cermets, incandescent filaments and cutting tools.[citation needed]
Production
Zirconium carbide is made by carbo-thermal reduction of zirconia by graphite. Densified ZrC is made by sintering powder of ZrC at upwards of 2000 °C. Hot pressing of ZrC can bring down the sintering temperature consequently helps in producing fine grained fully densified ZrC. Spark plasma sintering also has been used to produce fully densified ZrC.[citation needed]
Poor oxidation resistance over 800 °C limits the applications of ZrC. One way to improve the oxidation resistance of ZrC is to make composites. Important composites proposed are ZrC-ZrB2 and ZrC-ZrB2-SiC composite. These composites can work up to 1800 °C.[citation needed]
References
- ↑ 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 2.0 2.1 2.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 3.0 3.1 3.2 3.3 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 4.0 4.1 4.2 Zirconium carbide in Linstrom, P.J.; Mallard, W.G. (eds.) NIST Chemistry WebBook, NIST Standard Reference Database Number 69. National Institute of Standards and Technology, Gaithersburg MD. http://webbook.nist.gov (retrieved 2014-06-30)
- ↑ 5.0 5.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Measurement and theory of the hardness of transition- metal carbides , especially tantalum carbide. Schwab, G. M.; Krebs, A. Phys.-Chem. Inst., Univ. Muenchen, Munich, Fed. Rep. Ger. Planseeberichte fuer Pulvermetallurgie (1971), 19(2), 91-110
- Pages with broken file links
- Articles without EBI source
- Chemical pages without ChemSpiderID
- Articles without KEGG source
- Articles without InChI source
- Articles without UNII source
- Chembox and Drugbox articles with a broken CheMoBot template
- Articles with unsourced statements from May 2012
- Zirconium compounds
- Carbides
- Superhard materials
- Refractory materials