Anaconda Copper Mine (Nevada)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Anaconda Mine
200px
Anaconda Copper Mine. Inactive since 1978, the pit has flooded.
Location
Anaconda Mine is located in Nevada
Anaconda Mine
Anaconda Mine
Location in Nevada
Location Lyon County
State Nevada
Country United States
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Production
Products Copper
Production 360 million tons
Combined ore and waste
Financial year Life of Mine
History
Opened 1918 (as Empire-Nevada Mine)
1953 (as Anaconda Copper Mine)
Closed 1978
Owner
Company Quaterra Resources Inc. (current)
Arimetco, Inc. (1988-2011)
Don Tibbals (1982-1988)
Anaconda Copper (1941-1982)
Website http://www.quaterra.com/
Year of acquisition 2011

The Anaconda Copper Mine is an open pit copper mine in Lyon County, Nevada that was owned and operated by the Anaconda Mining Company. It is located adjacent to the town of Yerington. A company town, Weed Heights, was built to support the mining operation which ran from 1952 until 1978.[1]

History

The Anaconda Mine first opened in 1918 as the Empire-Nevada Mine.

William Burford Braden endorsed the copper porphyry property for Anaconda before his death in 1942.[2] In 1941 the property was acquired by the Anaconda Copper Company. Mining and milling operations began in 1952 and ran until mining operations ceased in 1978 due to low copper prices and declining grades in the open pit. Anaconda had become a subsidiary of Atlantic Richfield Company in 1977. All site activities were shut down in 1982 and the property was sold to Don Tibbals, a Lyon County commissioner. In 1978 Tibbals sold the property to Arimetco, Inc., with the exception of the Weed Heights residence area. Arimetco pursued leaching operations on the site, eventually building an electrowinning plant and five heap leach pads to produce copper. In 1997 Arimetco went bankrupt and effectively abandoned the site in 2000. In 2011 Quaterra Resources Inc. purchased all the Yerington Mining District assets of the bankrupt Arimetco. Environmental liability for the Anaconda Mine remains with ARCO, which is now a subsidiary of British Petroleum, and known as BP West Coast Products LLC.[1][3][4]

Production

The Anaconda mine operated for 25 years and produced approximately 360 million tons of material from the pit. Most of the material remains in tailings or in leach heap piles. The copper was processed from the extracted ore using two processes. Copper oxide ore (from the upper portion of the pit) was processed by heap leaching, either directly with sulfuric acid in vats to produce a copper solution precipitated by passing it over scrap iron, or by leaching successively in acid and kerosene solutions, subsequently electroplating onto stainless steel sheets. Copper sulfide ore from the lower portion of the pit was processed by crushing, and flotation with calcium oxide added to the solution to maintain an alkaline pH.[5]

File:Anaconda mine facilities, Yerington, Nevada.JPG
The abandoned processing facilities at the Anaconda Copper Mine

Environmental issues

The mining wastes at the closed mining site have been investigated by the US Environmental Protection Agency. Since 2000, it has spent approximately $6 million addressing this issue and ARCO has spent $2.7 million to clean the site.[6] In 2009 ARCO committed to spending $10.2 million for future and past cleanup work. Of the $10.2 million, $8 million was for future work and $2.2 million was to reimburse the EPA for past work completed. ARCO had reimbursed the EPA $2.7 million in 2008.[7]

In 2013 Yerington residents were awarded up to a $19.5 million in settlement of a 2011 class action case that accused ARCO and BP America of leaking uranium, arsenic and other pollutants into soil and ground water for decades and of covering up the extent of the contamination.[8]

References

  1. 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.

External links