Antioch Bridge
| Antioch Bridge | |
|---|---|
Antioch Bridge, 2011
|
|
| Coordinates | Lua error in package.lua at line 80: module 'strict' not found. |
| Carries | 2 lanes of  SR 160, bicycles and pedestrians. |
| Crosses | San Joaquin River |
| Locale | Antioch, California and Sacramento County, California, U.S. |
| Official name | Senator John A. Nejedly Bridge |
| Owner | Caltrans |
| Maintained by | Caltrans and the Bay Area Toll Authority |
| Characteristics | |
| Design | steel plate girder |
| Total length | 9,504 feet (2,897 m) |
| Longest span | 460 ft |
| Clearance below | 135 feet (41 m) |
| History | |
| Opened | December 1978 |
| Statistics | |
| Toll | Cars (northbound only) $5.00 (cash or FasTrak), $2.50 (carpools during peak hours, FasTrak only) |
The Antioch Bridge (officially known as the Senator John A. Nejedly Bridge) crosses the San Joaquin River linking Antioch, California with southern Sacramento County, California, near the city of Isleton, California in the United States. The bridge is signed as part of State Route 160. Unlike the other toll bridges in California, the Antioch bridge has only one lane going in each direction. It has bicycle and pedestrian access.
Contents
History
The current bridge was completed and opened to traffic in December 1978.[1] It measures 1.8 miles (2.9 km). It replaced the original structure that was built in 1926 by Aven Hanford and Oscar Klatt, who went on to build the original span of the Carquinez Bridge. The original lift span bridge was plagued with problems throughout its lifetime. Heavy traffic could cross it at no more than 15 miles per hour (24 km/h), and its narrow shipping canal led to collisions in 1958, 1963 and 1970.[2]
The 1970 collision spurred efforts to build a replacement bridge. In that incident, the lift span was stuck in the raised position. The bridge tender could not leave the bridge and remained in the control house for three days. Local firemen eventually made their way to him and brought him out, and he immediately quit his position. He went on to tend bridges in the Ryde/Walnut Grove area for many years.[citation needed]
The bridge was tolled when it first opened, but tolls were removed after the state bought the bridge in 1940. Tolls were reinstated with the construction of the new span.
Tolls
Tolls are only collected from northbound traffic at the toll plaza on the south side of the bridge. Since July 2010, the toll rate for passenger cars is $5. During peak traffic hours, carpool vehicles carrying two or more people or motorcycles pay a discounted toll of $2.50.[3][4] For vehicles with more than two axles, the toll rate is $5 per axle.[5] Drivers may either pay by cash or use the FasTrak electronic toll collection device. There are currently three booths at the toll plaza, with the far left booth dedicated to FasTrak users only; the other two booths accept both cash and FasTrak.
References
<templatestyles src="Reflist/styles.css" />
Cite error: Invalid <references> tag; parameter "group" is allowed only.
<references />, or <references group="..." />Sources
- Caltrans Facts - Bay Area
- Lua error in package.lua at line 80: module 'strict' not found.
External links
| External image | |
|---|---|
 Antioch Bridge Image |
|
Crossings of the San Joaquin River
|
||||
|---|---|---|---|---|
|
||||
.svg){kind=small}
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- Pages with reference errors
- Articles with unsourced statements from April 2015
- Bridges completed in 1930
- Bridges completed in 1978
- Bridges in the San Francisco Bay Area
- San Francisco Bay
- Toll bridges in California
- Plate girder bridges
- Road bridges in California
- Antioch, California
- Bridges in Contra Costa County, California
- Bridges in Sacramento County, California
