Dames Point Bridge

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

Lua error in Module:Infobox at line 235: malformed pattern (missing ']').

The Dames Point Bridge (officially the Napoleon Bonaparte Broward Bridge) is a cable-stayed bridge over the St. Johns River in Jacksonville, Florida on the Interstate 295 East Beltway. Construction began in 1985 and was completed in 1989. The main span is 1,300 feet (396.2 m), and is 175 feet (53.3 m) high. The bridge was designed by HNTB Corporation and RS&H, Inc. The Massman Construction Company built the bridge.[1]

Design

The bridge's cables are arranged on multiple vertical planes in a slight modification to the harp (parallel) stay arrangement.[2] Main span cables are paired to anchor into the tower in a vertical plane while side span cables pair up to anchor in a horizontal plane such that four cables anchor in each tower at approximately the same elevation.[citation needed]

Superlatives

Until the 2003 completion of the Sidney Lanier Bridge in Brunswick, Georgia the Dames Point Bridge was the only bridge in the United States to feature the harp stay arrangement.[citation needed]

It remains is one of the largest cable-stayed bridges built in the United States[2][3] having 21 miles (34 km) of cable.[2]

Gallery

Accident

On May 15, 1989 while inspectors were checking the bridge for cracks and fissures, the boom arm holding a bucket snapped leaving the bucket tilted on its side and the workers at risk of plummeting hundreds of feet to the river below. Rescuers rappelled down the side of the bridge to the workers and successfully brought all of them to safety. The story of this rescue effort was aired on Rescue 911 on September 12 of the same year.

References

<templatestyles src="Reflist/styles.css" />

Cite error: Invalid <references> tag; parameter "group" is allowed only.

Use <references />, or <references group="..." />


External links

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 2.2 Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.