Liddell Power Station
Liddell Power Station | |
---|---|
File:Liddell Power Station.jpg | |
Country | Australia |
Location | New South Wales |
Coordinates | Lua error in package.lua at line 80: module 'strict' not found. |
Status | Baseload |
Commission date | 1971-1973 |
Owner(s) | AGL Energy |
Geothermal power station | |
Type | Steam turbine thermal coal |
Thermal power station | |
Cogeneration? | • Two 25 megawatts (34,000 hp) oil-fired gas turbines; • One 0.85 megawatts (1,140 hp) mini-hydroelectric generator |
Power generation | |
Units operational | Four 500 megawatts (670,000 hp) |
Make and model | GEC Turbine Generators Limited, Manchester, England |
Thermal capacity | 2,000 megawatts (2,700,000 hp) |
Website www |
Liddell Power Station is a coal-powered thermal power station with four 500 megawatts (670,000 hp) GEC (UK) steam driven turbo alternators for a combined capacity of 2,000 megawatts (2,700,000 hp). Commissioned between 1971 and 1973, the station is located at Lake Liddell near Muswellbrook, in the Hunter Region, New South Wales, Australia.
Prior to September 2014 Liddell power station was part of NSW Government power producer, Macquarie Generation.[1] Macquarie Generation was acquired by AGL Energy in September 2014.[2]
History
The first generator was completed in 1971, two more in 1972, and the fourth in 1973. At the time of its completion, Liddell was the most powerful generating station in Australia. The completion of Liddell aided in the retirement of earlier power stations in Sydney, such as Bunnerong.
Originally fitted with the then-standard electrostatic precipitators for dust collection, the more efficient Fabric Filters (as used at Eraring, Munmorah units 3 and 4,Vales 5+6, Bayswater and Mount Piper) were retrofitted in the early 1990s, reducing particulate emissions to a barely visible level.
Much of the coal is supplied by overland conveyors from mines it shares with the nearby Bayswater Power Station.
Liddell was the first major power station in NSW to be built inland, using fresh water for cooling instead of the more abundant salt water used in coastal power stations. To accommodate this, Lake Liddell was expanded to provide more water.
Alternative fuel sources
In addition to the coal power station, Liddell runs two 25 MW oil-fired gas turbines[3] and an 0.85 MW mini-hydroelectric generator.[3][4] It is also "licensed to co-fire plant biomass and coal to produce electricity", which essentially means it can use sawdust and wood shavings from the nearby timber industry as a portion of its fuel, replacing up to 5% of its coal requirements.[5][6] In practice, however, biomass accounts for only about 0.5% of Liddell's output.[citation needed]
In 2007 a project commenced at Liddell to replace some of the station's boiler feed-water by hot water from a solar thermal array.[7] As of March 2007, the project was at a second-stage prototype but had not been connected to the power station.
Greenhouse emissions
Carbon Monitoring for Action estimates this power station emits 14.70 million tonnes of greenhouse gases each year as a result of burning coal.[8] In 2010 the Australian Government introduced a Carbon Pollution Reduction Scheme to help combat climate change. The scheme has impacted on emissions from power stations. The National Pollutant Inventory provides details of a range of pollutant emissions, including CO, estimated at 1,000,000 kilograms (2,200,000 lb) for the year ending 30 June 2011.[9]
References
<templatestyles src="Reflist/styles.css" />
Cite error: Invalid <references>
tag; parameter "group" is allowed only.
<references />
, or <references group="..." />
External links
- Macquarie Generation page on Liddell
- Proposed 38 MW solar thermal "coal saver" plant at Liddell
- Solar thermal plant at the Liddell Power Station gets government support
- ↑ "Macgen Website"
- ↑ "AGL completes acquisition of Macquarie Generation assets", 2 September 2014
- ↑ 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.[dead link]
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- Pages with reference errors
- Use dmy dates from October 2015
- Use Australian English from October 2015
- All Wikipedia articles written in Australian English
- Pages with broken file links
- Articles with unsourced statements from June 2012
- Coal-fired power stations in New South Wales
- Muswellbrook Shire
- Articles with dead external links from October 2010