RS Elite

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
RS Elite
Current specifications
Crew 3
Type Monohull
Construction Vinylester GRP
Rig Carbon composite mast and bowsprit & boom and spinnaker pole
Keel Encapsulated lead bulb/fin keel
625 kg (1,378 lb)
LOA 7.4 m (24 ft)
Beam 1.72 m (5 ft 8 in)
Draft 1.1 m (3 ft 7 in)
Hull weight 975 kg (2,150 lb)
Mainsail area 15.32 m2 (164.9 sq ft)
Jib / Genoa area 6.7 m2 (72 sq ft)
Spinnaker area 25 m2 (270 sq ft)
RYA PN 938
Development
Designer Phil Morrison

The RS Elite is a 24-foot keelboat designed by Phil Morrison.[1] Built to meet the requirements of the Hayling Island Sailing Club,[1] the class has a start at Cowes Week and events around the United Kingdom.[1][2] Fleets can be found at the Royal Burnham Yacht Club in the UK, as well as at Falmouth, Belfast Lough and Lymington. Outside the UK, the class can be found in locations such as the Caribbean, Guernsey, Holland, Norway,and Sweden.[3]

Performance and design

The RS Elite draws 3 ft 7 in (1.09 m), and adheres to one design principles. The keel is moulded on to vertical stainless steel struts. The boat has a "long sloping transom" and almost parallel sides, a maximised waterline length and the boat is designed for speed and control.[4] For racing it is a no hiking boat: crews’ knees must stay inside the boat at all times. There is a full length alloy tube kick bar down the centreline of the boat which you hook your feet under.[5]

The mast can be erected by hand and is made from carbon fibre.[4] The non-overlapping jib is self tacking on a single line, which is lead to a 4:1 purchase. There is no crew weight limit, but the class rules specify that it must be sailed by between two and three crew members, although the number can be more or less than that with special dispensation from the race committee.[5] In handicap racing the RS Elite sails off a Portsmouth Yardstick of 938.[6]

References

  1. 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
  5. 5.0 5.1 Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.

External links