Rabbet
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
A rabbet (also known as a rebate in Britain [1][2]) is a recess or groove cut into the edge of a piece of machinable material, usually wood. When viewed in cross-section, a rabbet is two-sided and open to the edge or end of the surface into which it is cut.
The word rabbet is from Old French rabbat, "a recess into a wall,"[3] and rabattre "to beat down".[4]
An example of the use of a rabbet is in a glazing bar where it makes provision for the insertion of the pane of glass and putty. It may also accommodate the edge of the back panel of a cabinet. It is also used in door and casement window jambs, and for shiplap planking. A rabbet can be used to form a joint with another piece of wood (often containing a dado).
A rebate joint is like a butt joint but it has more advantages.[vague]
Methods
- A rabbet router using a straight or rebate bit
- Rabbetting or rebate plane or a shoulder plane
- Circular saw with multiple passes (depending on width and depth)
- Dado set in a single pass
- Spindle moulder
- Hand saw and chisel
- Bandsaw
- Jointer equipped with a rabbet ledge
References
<templatestyles src="Reflist/styles.css" />
Cite error: Invalid <references> tag; parameter "group" is allowed only.
<references />, or <references group="..." />
<templatestyles src="Asbox/styles.css"></templatestyles>
 |
This article about joinery, woodworking joints, carpentry or woodworking is a stub. You can help Wikipedia by expanding it. |
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Online Etymology Dictionary
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
